Minelab Excalibur Accessories
This is Plugger's newest Shaft Lock!

All of our Rods will now feature them!
They are also available as replacement locks!


    Made from tough ABS plastic for eliminating the wobble in the coil rod. No
    cam to crap up and freeze the coil rod. Can be easily removed for cleaning
    the sand out of the shaft. This lock just clamps around the coil rod,
    eliminating the wobble. All nylon hardware, no metal! Weighs only 1.1
    ounces and, unlike the twist locks used by the various manufacturers, it
    does not utilize a "cam" so it is not prone to the "sticky" lower rod
    problems associated with the Cam Locks (twist locks) used on almost all
    stock detector shafts. On the water machines, especially, the cam gets
    crapped up with sand and salt and the lower rod "freezes" up inside of the
    upper shaft. This can cause damage to both the lower rod and the twist
    lock. With this new lock, you just loosen the knob and flush the shaft and
    lower rod with water and it will loosen up quite easily.
      
This new Shaft Lock fits all 7/8" shafts

Click here for more Shaft Lock Photos
New Universal Shaft Locks!!
New Replacement Shaft Locks

Our Price $12.00
Free shipping in the Continental US!
Excalibur Hip Mounts

Plugger's Hip Mount Kit
This Excalibur Hip Mount comes with a  2" web belt that goes up to a
46" waist size.  Most others only have a 1" belt, cuts into your
body, and is downright uncomfortable.  The belt color scheme
may change slightly but it will always be black.  The "Dual Loop"
in the foreground is his "Cable Restraint System" to protect
the cable connection to the control pod.

Instructions are included. It's very easy to set up.

Click here to check out our Hip Mount Straight Rods!
Excalibur Hip Mount Kit  for the
Minelab Excalibur 800 &1000

Our Price $39.99
Free shipping in the Continental US!
Excalibur Pods mounted on the belt for an example.
Pod attachments for the hip mount belt.
New Cable Restraint System
Excalibur Knob Guard
Excalibur Knob Guard

Our Price $29.99
Free shipping in the Continental US!
Excalibur Metal Arm Cuff
Powder Coated Aluminum Arm Cuff

Includes Strap, Removeable/Reversible Pad and Stainless
Steel bolts, washers and wing Nut
.
Black, Powder Coated
Excalibur Arm Cuff

Our Price $29.95
Free shipping in the Continental US!
Excalibur Stock "S" Rod Extensions
Rod extensions for the Excalibur or Excalibur II Stock Minelab "S"
Rods that allow you to put the Control and battery Pod behind your
elbow. It uses the arm cuff bolt to secure to the rod. It comes in your
choice of color: Silver, Blue, or Black.
Blue Rod Extension

Our Price $29.95
Free shipping in the
Continental US!
Silver Rod Extension

Our Price $29.95
Free shipping in the
Continental US!
Black Rod Extension

Our Price $29.95
Free shipping in the
Continental US!

Plugger's New Chest Mount Kit!

Introducing our new Excalibur Chest Mount Harness.  It is made from soft, yet firm 2"
Polyester webbing, very similar to seat belt webbing. It has low water absorption, much
lower than nylon and, unlike nylon, it is resistant to rot and mildew, so it is perfect for water
hunting.  It is much softer than polyweb belts and 5 times more abrasive resistant. The belt
strap is 60" long and the shoulder straps are 44" long so there is plenty of adjustment for all
size bodies.  Color is Black. It also has his new "Cable Restraint System" so you don't have to
worry about damaging your cable connections.  See the picture below of Bill pulling on the coil
cable and you can see the stress on the belt while the cable going to the control pod remains
slack. This is a must for people who hip or chest mount their Excals. Please tell us if you swing
your detector rod with your Right or Left hand so that he can put the CRS
(Cable Restraint System) on the correct side and save you the trouble of moving it,
although it isn't hard to move, it's just easier when the belt and harness is first assembled.  
It comes fully assembled!

Click here to check out our Chest/Hip Mount Straight Rods!
Click on a Thumbnail for a Larger Image!
In the photo below Bill is pulling on the cable demonstrating how well his Cable
Retention System works. You can see the bulge in the belt and dual loop but the
cable on the other side, going to the pod is still slack!
Excalibur Chest Mount Kit
for the Minelab Excalibur 800 &1000

Our Introductory  Price $79.99
Free shipping in the Continental US!
Chest Mount Kit
Without the Excalibur Bracket

Our Introductory  Price $69.99
Free shipping in the Continental US!
Cable Restraint Side
Cable Restraint Side
Quantity